Frankencaster
Pinout info for an ESP-32 powered Rock Band guitar.
The goal of the first prototype was to design a solderless replacement for the internal board of a Rock Band Genericaster. A majority of other alternatives make use of a Raspberry Pi Pico, which requires soldering. Future reworks will focus on building new guitars that don't require any used hardware.
| Pin | Button | Mapping |
|---|---|---|
GIOP23 |
Green (A) | BUTTON_1 |
GIOP22 |
Red (B) | BUTTON_2 |
GIOP21 |
Yellow (Y) | BUTTON_4 |
GIOP4 |
Blue (X) | BUTTON_8 |
GIOP15 |
Orange (RB) | BUTTON_5 |
GIOP13 |
Plus (Start) | BUTTON_12 |
GIOP5 |
D-Pad Right | HAT_RIGHT |
GIOP26 |
D-Pad Left | HAT_LEFT |
GIOP17 |
Strumbar/D-Pad Down | HAT_DOWN |
GIOP16 |
Strumbar/D-Pad Up | HAT_UP |
GIOP2 |
Minus (Select) | BUTTON_11 |
UNASSIGNED |
Whammy | BUTTON_? |
UNASSIGNED |
Home | BUTTON_? |
UNASSIGNED |
Pair | BUTTON_? |